home *** CD-ROM | disk | FTP | other *** search
- Path: hpwin055.uksr!news
- From: paul_hadrill@hp-unitedkingdom-om1.om.hp.com (Paul Hadrill)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Amiga 1200 HD won't boot on cold boot, only warm boot
- Date: 15 Jan 1996 16:05:00 GMT
- Organization: Hewlett Packard LTD
- Message-ID: <4ddtvc$487@hpwin055.uksr.hp.com>
- References: <4dbt5u$h48@blues.axionet.com>
- NNTP-Posting-Host: hpbrap78.uksr.hp.com
- X-Newsreader: WinVN 0.99.7
-
- In article <4dbt5u$h48@blues.axionet.com>, asbacher@axionet.com says...
- >
- >The system I'm running has 4 Amiga 1200's in it and two of these four
- >systems have No keyboard NO floppy and use a PC Power Supply and only
- >have a HD for booting and they DON'T boot on POWERUP with the standard
- >Seagate Drive, ST9100. You must do a soft reboot to get the HD
- >to load WB. THIS REALLY SUCKS.
- >
- >How can I make the Amiga 1200 actually WAIT for a HD response or put in a
- >very long wait perdiod rather than going too quickly to see if the HD is
- >there and if not NO HD AVAILABLE.
- >
-
- I also have this problem with a TOSHIBA 2.5 drive (don't know the model?).
- This is becoming very anoying and I was once told that there was a jumper on
- the 1200 motherboard but I could never find it.
-
- Anybody know where the jumper is?
-
- Regs
- Paul Hadrill
-
-